Product Description
Double Stage Inline Planetary Gear Reducer Equal to Bonfigiloli 300 Series
Product Description
SGR planetary gear motor
Technical data:
1. Ratio range: 8.1-191
2. Input power: 0.12-270 KW
3. Permit torque rang: ≤ 50000 N. M
4. Output speed: 0.3~205 r/min
5. Structure: Foot-mounted, flange-mounted, shaft-mounted
| Input structure | motor,IEC flange |
| Output speed | solid shaft, hollow shaft with key,with shrink disk |
Characteristic:
1. Adopt optimized design, module combination, right angle output, space reduction
2. High strength and longevity gears
3. Can be combined with various motors, wider ratio range
4. Big output torque, smoothly startup, high efficiency
Production pictures:
Packing Pictures :
Factory
| Application: | Motor, Electric Cars, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Four-Step |
| Samples: |
US$ 4000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the considerations for choosing the appropriate lubrication for gear reducers?
Choosing the appropriate lubrication for gear reducers is crucial for ensuring optimal performance, longevity, and efficiency. Several considerations should be taken into account when selecting the right lubrication:
1. Load and Torque: The magnitude of the load and torque transmitted by the gear reducer affects the lubrication’s viscosity and film strength requirements. Heavier loads may necessitate higher viscosity lubricants.
2. Operating Speed: The speed at which the gear reducer operates impacts the lubrication’s ability to maintain a consistent and protective film between gear surfaces.
3. Temperature Range: Consider the temperature range of the operating environment. Lubricants with suitable viscosity indexes are crucial to maintaining performance under varying temperature conditions.
4. Contaminant Exposure: If the gear reducer is exposed to dust, dirt, water, or other contaminants, the lubrication should have proper sealing properties and resistance to contamination.
5. Lubrication Interval: Determine the desired maintenance interval. Some lubricants require more frequent replacement, while others offer extended operational periods.
6. Compatibility with Materials: Ensure that the chosen lubricant is compatible with the materials used in the gear reducer, including gears, bearings, and seals.
7. Noise and Vibration: Some lubricants have properties that can help reduce noise and dampen vibrations, improving the overall user experience.
8. Environmental Impact: Consider environmental regulations and sustainability goals when selecting lubricants.
9. Manufacturer Recommendations: Follow the manufacturer’s recommendations and guidelines for lubrication type, viscosity grade, and maintenance intervals.
10. Monitoring and Analysis: Implement a lubrication monitoring and analysis program to assess lubricant condition and performance over time.
By carefully evaluating these considerations and consulting with lubrication experts, industries can choose the most suitable lubrication for their gear reducers, ensuring reliable and efficient operation.
How do gear reducers ensure efficient power transmission and motion control?
Gear reducers play a vital role in ensuring efficient power transmission and precise motion control in various industrial applications. They achieve this through the following mechanisms:
- 1. Speed Reduction/Increase: Gear reducers allow you to adjust the speed between the input and output shafts. Speed reduction is essential when the output speed needs to be lower than the input speed, while speed increase is used when the opposite is required.
- 2. Torque Amplification: By altering the gear ratio, gear reducers can amplify torque from the input to the output shaft. This enables machinery to handle higher loads and provide the necessary force for various tasks.
- 3. Gear Train Efficiency: Well-designed gear trains within reducers minimize power losses during transmission. Helical and spur gears, for example, offer high efficiency by distributing load and reducing friction.
- 4. Precision Motion Control: Gear reducers provide precise control over rotational motion. This is crucial in applications where accurate positioning, synchronization, or timing is required, such as in robotics, CNC machines, and conveyor systems.
- 5. Backlash Reduction: Some gear reducers are designed to minimize backlash, which is the play between gear teeth. This reduction in play ensures smoother operation, improved accuracy, and better control.
- 6. Load Distribution: Gear reducers distribute the load evenly among multiple gear teeth, reducing wear and extending the lifespan of the components.
- 7. Shock Absorption: In applications where sudden starts, stops, or changes in direction occur, gear reducers help absorb and dampen shocks, protecting the machinery and ensuring reliable operation.
- 8. Compact Design: Gear reducers provide a compact solution for achieving specific speed and torque requirements, allowing for space-saving integration into machinery.
By combining these principles, gear reducers facilitate the efficient and controlled transfer of power, enabling machinery to perform tasks accurately, reliably, and with the required force, making them essential components in a wide range of industries.
What are the benefits of using a gear reducer in industrial applications?
Gear reducers offer several benefits that make them indispensable in various industrial applications:
1. Speed Reduction: Gear reducers allow the reduction of high-speed input from motors or engines to lower, more usable output speeds for specific applications, ensuring proper equipment operation and safety.
2. Torque Increase: By leveraging the mechanical advantage of gear ratios, gear reducers can significantly increase torque output, enabling the handling of heavy loads and providing the necessary power for tasks such as lifting, conveying, and processing.
3. Precise Control: Gear reducers enable fine-tuning of rotational speed and torque, providing precise control over machinery and processes, which is crucial in industries like manufacturing, material handling, and robotics.
4. Shock Load Absorption: Gear reducers can absorb and dampen sudden shocks or changes in load, protecting both the machinery and connected components from abrupt forces that could otherwise lead to damage.
5. Versatility: With various gear types (e.g., spur, helical, worm) and designs, gear reducers can be tailored to different applications, including those requiring specific speed ratios, torque ranges, and environmental conditions.
6. Efficient Power Transmission: Gear reducers offer high mechanical efficiency, minimizing energy loss during power transmission, which is especially valuable in energy-conscious industries.
7. Compact Design: Gear reducers provide a compact solution for transmitting power and adjusting speeds, making them suitable for installations with space constraints.
8. Reliability and Longevity: Well-designed and properly maintained gear reducers can offer extended service life, contributing to reduced downtime and maintenance costs.
Overall, gear reducers enhance the performance, efficiency, and reliability of industrial equipment, making them essential components in a wide range of applications across various industries.
editor by CX 2023-12-12
China OEM Inline Shaft Coxial Gear Reducer Reduction Gearbox Helical Geared Motor gearbox drive shaft
Product Description
PROFESSIONAL MANUFACTURE
— SINCE 1995
R RF Series Inline Shaft Coxial Gear Reducer
Reduction Gearbox Helical Geared Motor
Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light
industry,environmental protection, paper making, printing, lifting transport, food industry and so on.
Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.
Product Description
It realized serialization and modularization with compact structure and wide range of transmission ratio.
The transmission efficiency reach up to 96%.
The gear processed by Carburizing, Nitriding & Grinding.
High efficiency, superior performance with less energy consumption.
High precision gear, steady transmission, low noise, large load capacity, long service life.
Support various of installation method.
Product Parameters
|
Size |
R 57 |
R 67 |
R 77 |
R 87 |
R 97 |
R 107 |
R 137 |
R 147 |
R 167 |
|
Structure |
R RF |
||||||||
|
Input power rating(kw) |
0.18-7.5KW |
0.18-7.5KW |
0.18-11KW |
0.55-22KW |
0.55-30KW |
2.2-45KW |
5.5-55KW |
11-90KW |
11-160KW |
|
Ratio |
4.39-186.89 |
4.29-199.81 |
5.21-195.24 |
5.36-246.54 |
4.49-289.74 |
5.06-249.16 |
5.15-222.60 |
5.00-163.31 |
10.24-229.71 |
|
Permissible torque N.m |
450 |
600 |
820 |
1550 |
3000 |
4300 |
8000 |
1300 |
18000 |
Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox. H PV series High quality Right Angle Unique speed reducer HB helical gearbox / gear box.
Detailed Photos
Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.
In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.
Packaging & Shipping
Application
| Driven machines | |||
| Waste water treatment | Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps | Dredgers | Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears |
| Chemical industry | Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges | Metal working mills | plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills |
| Metal working mills | Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives | Conveyors | Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears |
| Frequency converters | Reciprocating compressors | ||
| Cranes | Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes | Cooling towers | Cooling tower fans, blowers axial and radial |
| Cane sugar production | Cane knives, cane mills | Beet sugar production | Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter |
| Paper machines | Pulper drives | Cableways | Material ropeways, continuous ropeway |
| Cement industry | Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers | ||
Company Profile
Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand “TianQi”, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CZPT South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CZPT to speaking with you to future discuss how we can be of service to you.
FAQ
1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).
2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer’s drawing and sample.
3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher
4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Samples: |
US$ 420/Piece
1 Piece(Min.Order) | Order Sample What factors should be considered when selecting the right gear reducer?Choosing the appropriate gear reducer involves considering several crucial factors to ensure optimal performance and efficiency for your specific application:
By carefully assessing these factors and consulting with gear reducer manufacturers, engineers and industry professionals can make informed decisions to select the right gear reducer for their specific application, optimizing performance, longevity, and cost-effectiveness. |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do gear reducers handle variations in input and output speeds?
Gear reducers are designed to handle variations in input and output speeds through the use of different gear ratios and configurations. They achieve this by utilizing intermeshing gears of varying sizes to transmit torque and control rotational speed.
The basic principle involves connecting two or more gears with different numbers of teeth. When a larger gear (driving gear) engages with a smaller gear (driven gear), the rotational speed of the driven gear decreases while the torque increases. This reduction in speed and increase in torque enable gear reducers to efficiently adapt to variations in input and output speeds.
The gear ratio is a critical factor in determining how much the speed and torque change. It is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driving gear. A higher gear ratio results in a greater reduction in speed and a proportionate increase in torque.
Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve different speed reductions and torque enhancements. This design provides versatility in handling varia
How do gear reducers contribute to energy efficiency in machinery and equipment?
Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:
1. Speed Reduction: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.
2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.
3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.
4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.
5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.
6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.
7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.
8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.
9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.
10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.
By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.
tions in speed and torque requirements.
In summary, gear reducers handle variations in input and output speeds by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application’s needs.
editor by CX 2023-08-17
China factory Inline Shaft Coxial Gear Reducer Reduction Gearbox Helical Geared Motor with Good quality
Product Description
PROFESSIONAL MANUFACTURE
— SINCE 1995
R RF Series Inline Shaft Coxial Gear Reducer
Reduction Gearbox Helical Geared Motor
Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light
industry,environmental protection, paper making, printing, lifting transport, food industry and so on.
Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.
Product Description
It realized serialization and modularization with compact structure and wide range of transmission ratio.
The transmission efficiency reach up to 96%.
The gear processed by Carburizing, Nitriding & Grinding.
High efficiency, superior performance with less energy consumption.
High precision gear, steady transmission, low noise, large load capacity, long service life.
Support various of installation method.
Product Parameters
|
Size |
R 57 |
R 67 |
R 77 |
R 87 |
R 97 |
R 107 |
R 137 |
R 147 |
R 167 |
|
Structure |
R RF |
||||||||
|
Input power rating(kw) |
0.18-7.5KW |
0.18-7.5KW |
0.18-11KW |
0.55-22KW |
0.55-30KW |
2.2-45KW |
5.5-55KW |
11-90KW |
11-160KW |
|
Ratio |
4.39-186.89 |
4.29-199.81 |
5.21-195.24 |
5.36-246.54 |
4.49-289.74 |
5.06-249.16 |
5.15-222.60 |
5.00-163.31 |
10.24-229.71 |
|
Permissible torque N.m |
450 |
600 |
820 |
1550 |
3000 |
4300 |
8000 |
1300 |
18000 |
Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox. H PV series High quality Right Angle Unique speed reducer HB helical gearbox / gear box.
Detailed Photos
Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.
In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.
Packaging & Shipping
Application
| Driven machines | |||
| Waste water treatment | Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps | Dredgers | Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears |
| Chemical industry | Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges | Metal working mills | plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills |
| Metal working mills | Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives | Conveyors | Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears |
| Frequency converters | Reciprocating compressors | ||
| Cranes | Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes | Cooling towers | Cooling tower fans, blowers axial and radial |
| Cane sugar production | Cane knives, cane mills | Beet sugar production | Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter |
| Paper machines | Pulper drives | Cableways | Material ropeways, continuous ropeway |
| Cement industry | Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers | ||
Company Profile
Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand “TianQi”, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CZPT South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CZPT to speaking with you to future discuss how we can be of service to you.
FAQ
1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).
2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer’s drawing and sample.
3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher
4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Samples: |
US$ 420/Piece
1 Piece(Min.Order) | What role do gear ratios play in optimizing the performance of gear reducers?Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer. 1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase). 2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems. 3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan. 4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes. When selecting gear ratios for a gear reducer, it’s important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems. Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do gear reducers contribute to speed reduction and torque increase?
Gear reducers play a crucial role in mechanical systems by achieving speed reduction and torque increase through the principle of gear ratios. Here’s how they work:
Gear reducers consist of multiple gears with different sizes, known as gear pairs. These gears are meshed together, and their teeth interlock to transmit motion and power. The gear ratio is determined by the ratio of the number of teeth on 
Are there any disadvantages or limitations to using gear reducer systems?
While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:
1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.
2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.
3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.
4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.
5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.
6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.
7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.
8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.
Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.
the input gear (driver) to the number of teeth on the output gear (driven).
Speed Reduction: When a larger gear (output gear) is driven by a smaller gear (input gear), the output gear rotates at a slower speed than the input gear. This reduction in speed is proportional to the gear ratio. As a result, gear reducers are used to slow down the rotational speed of the output shaft compared to the input shaft.
Torque Increase: The interlocking teeth of gears create a mechanical advantage that allows gear reducers to increase torque output. When the input gear applies a force (torque) to the teeth, it is transmitted to the output gear with greater force due to the leverage provided by the larger diameter of the output gear. The torque increase is inversely proportional to the gear ratio and is essential for applications requiring high torque at lower speeds.
By selecting appropriate gear ratios and arranging gear pairs, gear reducers can achieve various speed reduction and torque multiplication factors, making them essential components in machinery and equipment where precise control of speed and torque is necessary.
editor by CX 2023-08-16
China OEM Inline Shaft Coxial Gear Reducer Reduction Gearbox Helical Geared Motor gearbox design
Product Description
PROFESSIONAL MANUFACTURE
— SINCE 1995
R RF Series Inline Shaft Coxial Gear Reducer
Reduction Gearbox Helical Geared Motor
Chinese electric motor speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light
industry,environmental protection, paper making, printing, lifting transport, food industry and so on.
Main Series Product: R series helical gear motor reducer, K series spiral bevel gear reducer, NGW, P series planetary gear reducer, H B series helical gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gearbox reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloidal speed reducer, etc. Meanwhile, map sample processing business can be undertaken.
Product Description
It realized serialization and modularization with compact structure and wide range of transmission ratio.
The transmission efficiency reach up to 96%.
The gear processed by Carburizing, Nitriding & Grinding.
High efficiency, superior performance with less energy consumption.
High precision gear, steady transmission, low noise, large load capacity, long service life.
Support various of installation method.
Product Parameters
|
Size |
R 57 |
R 67 |
R 77 |
R 87 |
R 97 |
R 107 |
R 137 |
R 147 |
R 167 |
|
Structure |
R RF |
||||||||
|
Input power rating(kw) |
0.18-7.5KW |
0.18-7.5KW |
0.18-11KW |
0.55-22KW |
0.55-30KW |
2.2-45KW |
5.5-55KW |
11-90KW |
11-160KW |
|
Ratio |
4.39-186.89 |
4.29-199.81 |
5.21-195.24 |
5.36-246.54 |
4.49-289.74 |
5.06-249.16 |
5.15-222.60 |
5.00-163.31 |
10.24-229.71 |
|
Permissible torque N.m |
450 |
600 |
820 |
1550 |
3000 |
4300 |
8000 |
1300 |
18000 |
Model selection for washing machine Gear Box Transmission:
Closely using the ideal reduction ratio.
Reduction ratio = servo motor speed / reducer output shaft speed
Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. industrial helical gearbox. H PV series High quality Right Angle Unique speed reducer HB helical gearbox / gear box.
Detailed Photos
Chinese Speed Reducer/industrial helical gearbox is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.
In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products.
Packaging & Shipping
Application
| Driven machines | |||
| Waste water treatment | Thickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumps | Dredgers | Bucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears |
| Chemical industry | Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges | Metal working mills | plate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills |
| Metal working mills | Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives | Conveyors | Bucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears |
| Frequency converters | Reciprocating compressors | ||
| Cranes | Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes | Cooling towers | Cooling tower fans, blowers axial and radial |
| Cane sugar production | Cane knives, cane mills | Beet sugar production | Beet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter |
| Paper machines | Pulper drives | Cableways | Material ropeways, continuous ropeway |
| Cement industry | Concrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers | ||
Company Profile
Established in 1995 , HangZhou Boji Machinery is a professional manufacturer and exporter that is concerned with the design, development and production of Gearbox Speed Reducer. We are located in HangZhou of ZheJiang Province, with convenient transportation access. With our own brand “TianQi”, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our company possesses complete machining center, lathe, gear shaping machine, gear milling machine, gear grinding machine and assembling lines. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
Besides, In 2005,we attained ISO9001 certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network CZPT South America, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and other countries and regions.
With rich export experience, high quality products, competitive prices, good service and in-time delivery, we certain that we can meet all of your requirement and exceed your expectations. Our feature is bright with new cooperative relationships with companies from all over the world. We look CZPT to speaking with you to future discuss how we can be of service to you.
FAQ
1. Who are we?
We are the Factory, with over 25 years of production experience, based in ZheJiang , China, start from 1995,sell to Domestic Market(50.00%),Mid East(10.00%),Southeast Asia(10.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),North America(3.00%),Africa(2.00%),Southern Europe(2.00%),South Asia(2.00%),Central America(1.00%).
2. Can you customize according to our requirements?
Yes, we can design nonstandard products according to customer’s drawing and sample.
3.What can you buy from us?
speed reducer,gearbox,gear motor,pump,crusher
4. Why should you buy from us not from other suppliers?
Founded in 1995, with over 20 years of production experience and credibility. With professional engineer team, advanced technology production and skilled workers.Specialized in the production of reducer. Map sample processing business can be undertaken.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Samples: |
US$ 420/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can you explain the different types of gear reducers available in the market?
There are several types of gear reducers commonly used in industrial applications:
1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.
2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.
3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.
4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.
5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.
6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.
7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to
How do gear reducers enhance the efficiency of conveyor systems and robotics?
Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here’s how they contribute:
Conveyor Systems:
In conveyor systems, gear reducers enhance efficiency in the following ways:
- Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
- Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
- Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
- Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.
Robotics:
In robotics, gear reducers enhance efficiency through the following means:
- Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
- Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
- Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
- Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.
By providing precise speed control, torque adjustment, and reliable motion transmission, gear reducers optimize the performance of conveyor systems and robotics, leading to improved efficiency, reduced energy consumption, and enhanced operational capabilities.
achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.
8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.
Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed r
How do gear reducers handle shock loads and sudden changes in torque?
Gear reducers are designed to handle shock loads and sudden changes in torque through several mechanisms that enhance their durability and reliability in challenging operating conditions.
1. Robust Construction: Gear reducers are constructed using high-strength materials and precision manufacturing techniques. This ensures that the gears, bearings, and other components can withstand sudden impacts and high torque fluctuations without deformation or failure.
2. Shock-Absorbing Features: Some gear reducer designs incorporate shock-absorbing features, such as flexible couplings, elastomeric elements, or torsionally flexible gear designs. These features help dampen and dissipate the energy from sudden shocks or torque spikes, reducing the impact on the entire system.
3. Torque Limiters: In applications where shock loads are common, torque limiters may be integrated into the gear reducer. These devices automatically disengage or slip when a certain torque threshold is exceeded, preventing damage to the gears and other components.
4. Overload Protection: Gear reducers can be equipped with overload protection mechanisms, such as shear pins or torque sensors. These mechanisms detect excessive torque and disengage the drive temporarily, allowing the system to absorb the shock or adjust to the sudden torque change.
5. Proper Lubrication: Adequate lubrication is essential for managing shock loads and sudden torque changes. High-quality lubricants reduce friction and wear, helping the gear reducer withstand dynamic forces and maintain smooth operation.
6. Dynamic Load Distribution: Gear reducers distribute dynamic loads across multiple gear teeth, which helps prevent localized stress concentrations. This feature minimizes the risk of tooth breakage and gear damage when subjected to sudden changes in torque.
By incorporating these design features and mechanisms, gear reducers can effectively handle shock loads and sudden changes in torque, ensuring the longevity and reliability of various industrial and mechanical systems.
atios, noise levels, space constraints, and application-specific needs.
editor by CX 2023-08-15
China wholesaler Inline Planetary Gear Reducer with Flange Mounted with high quality
Product Description
Inline planetary equipment reducer with flange mounted
Technological info:
1. Ratio range: 3.fifteen-3000
two. Enter power: .twenty five-55KW
three. Permit torque rang: ≤200000N. M
four. Output speed: .425-445 r/min
5. Composition manner: Probability of flange, foot, or shaft mounting remedies
Inline planetary gear reducer with flange mounted
Characteristic:
one. Extensive and thorough selection of N collection for industrial apps
2. Reduced velocity shaft layout: Cylindrical with key, splined, hollow with shrink disc or splined hollow shaft
3. Rigid and exact nodular solid iron casing
four. Reduced sounds managing, higher producing top quality normal
5. Higher and reliable performance, load capacity and reduced velocity shaft bearing
| Ratio | 3.15:1 to 9000:1 |
| Reduction Phases | up to 6 reduction stages in 1 gearbox |
| Nominal Output Torque | up to 800,000N.m |
Below is a record of our presently available industrial gearboxes. If you can not discover what you are seeking for, please make contact with the factory for far more possibilities. At EP, we are continually developing new items and retrofitting previous types to fulfill client requirements.
Right angle gearboxes (worm and planetary gears) are sturdy and can be utilized for 90° turns. An inline reducer (parallel shaft and planetary) is an best matching motor with large input speeds, or when gear motor efficiency is important. Speak to our complex income staff to assist figure out which transmission answer is ideal for you.
in New York United States sales price shop near me near me shop factory supplier R Series Foot Mounted Inline Helical Gear Speed Reducer manufacturer best Cost Custom Cheap wholesaler
We are searching ahead to building effective business associations with new clientele around the world in the long term. We have exported our goods to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states of america, Canada, and so forth. we supply chromed bar and tubes for hydualic and pheumatic cylinders. R series Helical Gear Velocity EPTT/Geared EPTT
Summary requirements
| Model | EPTT (kW) | EPTT ratio (i) | Output Velocity (RPM) |
Output Torque (N. m) |
| GR17-GR177 GRF17-GRF177 GRX57-GRX137 |
.twelve-a hundred and sixty | one.3-21221 | .06-794 | Leading to 36000 |
*Assortment XiHu (West Lake) Dis.hu (West Lake) Dis.traces*
Usually we can select one particular EPTT which is appropriate for you with some info from you
as under
ratio/motor speed/mounting dimension/ out torque and so on.
Application fields
steel, chemical, oil, drink, foods, digital, method hides, pharmacy, and textile.
They are commonly employed in various low-speed EPTTs, which are EPTT simple components of mechanical EPTT.
Features
one,highly stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd modular created according to international stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd
two,high precision, high effectiveness, good classification in EPTT ratio
three,wide variety, massive EPTT torque,
4,dependable functionality, low sound,
5,fleXiHu (West Lake) Dis.ble installation, and convenient use and upkeep.
FAQ
Q: What is your MOQ of this item?
A: 10PCS.
For the 1st time cooperation, we settle for trial sample purchase.
Q: What is your payment conditions?
A: 30% T/T deposit, 70% stability ahead of shipment or L/C at sight.
Q: What is the supply time?
A: 20-30 daEPTTafter getting your L/C or T/T deposit.
Q: Can we utilised our very own manufacturer on motors ?
A: Positive, we can offer you OEM support, manufacture with your licensed brand name.
Q: How EPTT is your guarantee?
A: twelve months right after obtaining B/L.
Manufacturing unit
Our Office Block
Our Group
in Jeonju Republic of Korea sales price shop near me near me shop factory supplier R37 R47 R57 R67 R77 R87 R97 R107 R137 R167 High Quality Hard Teeth Grinded Helical Gear Reducer Reduction Gearbox with Motor Inline manufacturer best Cost Custom Cheap wholesaler
Excellent interest has been compensated on environmental protection and vitality saving. Ever-Power Group CO., LTD. IS Specialist IN Creating ALL Sorts OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Pace REDUCERS, PARALLEL SHAFT HELICAL Equipment REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Car GEARBOXES, PTO Drive SHAFTS, Special REDUCER & Relevant Equipment Elements AND OTHER Relevant Products, SPROCKETS, HYDRAULIC System, VACCUM PUMPS, FLUID COUPLING, Equipment RACKS, CHAINS, TIMING PULLEYS, UDL Pace VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Minimal BACKLASH WORM REDUCERS AND SO ON. We supply OEM service. EPTT Parameter
| EPTT substance | EPTT200 high-energy solid iron(R37, R47, R57, R67, R77, R87) |
| EPTT content | EPTT250 Large power solid iron(R97, R 107, R137, R147, R167) |
| Gear material | 20CrMnTi |
| Gear Floor amphardness | EPTC58 deg-sixty two deg |
| Gear core hardness | EPTC33 deg-seventy eight deg |
| Enter/Output shaft content | 40Cr |
| Gear Machining precision | Correct grinding 6-five quality |
| Warmth treatment method | Carburizing, Quenching and so on |
| Efficiency | Up to 92% |
| Sounds(Max) | sixty-67dB |
| Installation kind | Foot mounted, flange mounted |
| Output variety | Sound shaft |
| EPTT brand | NSK, SKF, EPTB, ZWZ and so forth |
| Oil seal manufacturer | NAK, KSK and so forth |
| Lubricant | VG220 |
| EPTT | IP55, F class |
| EPTT shaft | 40Cr, Carburizing, Quenching and many others |
| Warranty | 12months |
| Coloration | Blue, Gray |
| Model | SLR37 | SLR47 | SLR57 | SLR67 | SLR77 | SLR87 | EWR97 | SLR107 | SLR137 | SLR147 | SLR167 |
| Excess weight | nine | fourteen | 24 | 27 | 33 | sixty | a hundred and ten | a hundred and fifty | 255 | 365 | 615 |
| Shaft #1060 | 25mm | 30mm | 35mm | 35mm | 40mm | 50mm | 60mm | 70mm | 90mm | 110mm | 120mm |
Software:
Ceramic Sector
Glass Business
Food Business
EPTTlurgy Business
Beer amp Drink Market
EPTT and dyeing Industry
Textile Market
Warehouse Logoistics Industry
EPTT working EPTTry
environmental safety gear Sector
Leather-based Business
Pharmacy Market
EPTT photos:
Deals:
Business Details:
Speak to:
in Hufuf-Mubarraz Saudi Arabia sales price shop near me near me shop factory supplier High Efficiency Precision Coaxial Inline Helical Motor Gear Reducer manufacturer best Cost Custom Cheap wholesaler
The solution properly shows environmental protection and strength preserving. Owing to our sincerity in providing best services to our clientele, comprehending of your requirements and overriding feeling of accountability toward filling purchasing demands, In this way, our goods have ongoing to gain market place acceptance and consumers fulfillment in excess of the earlier number of a long time. Large Effectiveness EPTT CoaXiHu (West Lake) Dis.al Inline Helical EPTT Gear EPTT
Attributes:
1. Compact structure and straightforward assembly
2. Vast pace ranges and higher torque
three. Reduced sound, very good sealing performance, higher performance
4. Steady and protected, EPTT life span, EPTT
five. Multi-structure, a variety of assembling methods
Product image:
Specification:
| ANG Helical Equipment EPTT | |
| Design | R17 ~ 187, F37-177, K37-187, S37-ninety seven, HB01-26 |
| Input EPTT | .06kw ~ 5000kw |
| Input pace | 750rpm ~ 3000rpm |
| Reduction ratio | one/1.3 ~ one/27000 |
| Enter motor | AC (one stage or three period) / DC / BLDC motor |
| Install kind | Foot / Strong shaft / Hollow shaft / Output flange #8230 |
| Effectiveness | ninety four% ~ ninety eight % for R F K sequence |
| EPTT of housing | die-forged EPTT / Forged iron / Stainless metal |
| EPTT of EPTT | Exact grinding, class six |
| Heat treatment method | Carburizing and quenching |
| Add-ons | Brake / Flange / EPTT adapter / Torque arm #8230 |
FAQ
Q: Can you make the EPTT with customization?
A: Yes, we can customize per your ask for, like EPTT, voltage, velocity, shaft measurement, flange, terminal box, IP quality, etc.
Q: Do you give samples?
A: Yes. Sample is obtainable for tests.
Q: What is your MOQ?
A: It is 1pcs for the beginning of our company.
Q: What is actually your direct time?
A: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd product require five-30days, a bit EPTTer for EPT merchandise.
Q: Do you offer EPTT help?
A: Of course. Our business have design and style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment group, we can offer EPTT help if you
need.
Q: How to ship to us?
A: It is accessible by air, or by sea, or by train.
Q: How to shell out the money?
A: T/T and L/C is desired, with different currency, incXiHu (West Lake) Dis.Hu (West Lake) Dis. USD, EUR, RMB, and so forth.
Q: How can I know the item is appropriate for me?
A: gt1ST validate drawing and specification gt2nd test sample gt3rd commence mass generation.
Q: Can I occur to your organization to go to?
A: Of course, you are welcome to check out us at any time.
Q: How shall we get in touch with you?
A: You can deliver inquiry immediately, and we will answer within 24 several hours.
in Rasht Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Suspended Cranes Application Cast Iron Inline Helical Gear Reducer Coupled with 100b5 Flange manufacturer best Cost Custom Cheap wholesaler
We will supply very best services and higher top quality items with all sincerity. In 2008, it was awarded with “Nationwide Export Commodity Inspection-totally free Enterprise”. we supply one-end resolution for the acquire of mechanical power transmission products in China. Suspended Cranes Application Cast Iron Inline Helical Equipment EPTT Coupled with 100b5 Flange
Merchandise Description
suspended cranes inline helical EPTT
SGR helical EPTTed motor human body use the substantial degree of modularity cast iron, the EPTT and the aXiHu (West Lake) Dis.s use the substantial quality alloy metal in orEPTTto the precision forging, the helical EPTT although the rigorous warmth treament procedure, ensures helical EPTT‘s depth and the rigidity. inline helical EPTT configure motor with flange or foot ,
helical EPTT design and style use modular compose with other EPTTs and variator, get a massive lessen ratio EPTT and variation. Consequently inline helical EPTT producer SGR ‘s helical EPTT motor applied to several EPTT spot, such as EPTTlurgical, EPTTs, lifting, transportation, petrochemical, design, textile, pharmaceutical, foodstuff, environmental, ligEPTT electric, plastic EPTT, paper, parking equipment etc.
You can download inline helical EPTT catalogue from rigEPTT button
EPTT data:
| Design | Shaft Dia. | CEPTTr Height | Output Flange Dia. | EPTT | Ratio | Permitted Torque | Bodyweight |
| Sound (mm) | (mm) | (mm) | (kw) | (Nm) | (KGS) | ||
| R37 | 25k6 | 90h13 | 120/one hundred sixty | .twelve~.75 | 5~136 | 150 | 10 |
| R47 | 30k6 | 115h13 | one hundred sixty/200 | .twenty five~2.2 | five~173 | three hundred | fifteen |
| R57 | 35k6 | 115h13 | two hundred/250 | 1.eighteen~five.five | 5~173 | 400 | 21 |
| R67 | 35k6 | 130h13 | 200/250 | .37~seven.five | 5~170 | 500 | 27 |
| R77 | 40k6 | 140h13 | 250/three hundred | .55~eleven | 5~192 | 750 | 35 |
| R87 | 50k6 | 180h13 | 300/350 | .75~18.5 | five~192 | 1250 | 65 |
| R97 | 60m6 | 225h13 | 350/450 | one.5~thirty | 5~197 | 2400 | 120 |
| R107 | 70m6 | 250h13 | 350/450 | two.two~45 | five~197 | 3600 | a hundred sixty five |
| R137 | 90m6 | 315h13 | 450/550 | four~fifty five | five~197 | 6600 | 255 |
| R147 | 110m6 | 355h13 | 450/550 | seven.5~ninety | five~195 | 10700 | 370 |
| R167 | 120m6 | 425h13 | 550/660 | 11~132 | eight~186 | 14800 | 700 |
| R187 | 160m6 | 510h13 | 660/770 | 15~a hundred and sixty | eight~186 | 28000 | 1500 |
| Remark: the weigEPTT without having oil and motor, shaft and flange input include ten%. | |||||||
FAQ:
1.Are you a factory or traEPTT?
We are a professional manufacturing unit which has twenty a long time historical past EPTTized in EPTT EPTT .
two.MOQ:
Our MOQ is 1pcs. Nonetheless there is one particular handling EPTT $150 for the one orEPTTwhich much less than $3000.00
three. Guarantee
Our guarantee is 12months
4. Payment time period
one hundred% T/T EPTT and LC at sigEPTT .
five. Do you settle for customization ?
Of course.SGR have powerful R ampD staff, we can give customizable service in accordance to specifications.
6. EPTT
EPTTly we use stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd export plywood situation to set up the cargo .
seven. Shipping time
In standard ,time of shipping is 30daEPTTafter acquiring the prepayment .
eight. What kinds of certification do you use ?
DNV-ISO9001:2008, SGS,CE and many others, And new merchandise patent.
nine. What varieties of inspection you do ahead of shipment ?
We do temperature examination, sounds, and oil leak inspection and commissioning before shipment.
ten.How do you remedy if the manufacturing have difficulty ?
Largely, we don’t require buyer send out the items back to us. Simply because the EPTT is very large, if there satisfies a dilemma,we first of all inquire for the photos for ruined components. And base on the photos, we can have a basic notion for the defect reason. Our ensure is twelve months, if throughout the guarantee, we can source restore .
in Pontianak Indonesia sales price shop near me near me shop factory supplier Inline Servo Motor Precise Low Backlash Precision Gearbox, Planetary Gear Box, High Efficient Right-Angle Hollow Shaft Coaxial Speed Reducer manufacturer best Cost Custom Cheap wholesaler
Our items are applied in numerous fields. Moreover, WE CAN Create Customized VARIATORS, GEARED MOTORS, Electric MOTORS AND OTHER HYDRAULIC Merchandise In accordance TO CUSTOMERS’ DRAWINGS. a specialised provider of a complete assortment of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers. Inline Servo EPTT Exact Reduced Backlash EPTT EPTT, Planetary Gear Box, Higher Successful CoaXiHu (West Lake) Dis.al velocity EPTT
Features:
one. Making use of involute EPTT EPTT, alloy steel with carbonize amp quencher warmth therapy, precision level
of EPTT grinding could get to ISO class 5, the profile and aXiHu (West Lake) Dis.al modification could enhance the bearing
ability, steadiness of mesh and low sound.
2. With integral output shaft and bearing assistance for both sides of world wheel, acknowledging higher precision
and increased rigidity.
three. Small backlash, the precise one phase can achieve inside three arcmin as clients’ request.
four. Gyration parts of the enter facet with dynamic equilibrium remedy can make certain the EPTT working
steadily at higher speed.
5. It can blend with any servo motor, can be made for EPTT combination, and straightforward for mounting.
(It can be EPTTly made to accept any kind of servo motor, mounting is convenient)
6. Straightforward for maintenance, it doesn’t want to alter the oil(grease) throughout the services life time.
Solution photograph:
Specification:
| ANG EPTT Planetary EPTT | |||
| Product | forty-220 | Type | CoaXiHu (West Lake) Dis.al or RigEPTT angle |
| Ratio | 1/three ~ 1/512 | Torque | forty-3000Nm |
| Performance | 98% | Enter/Output shaft materials | 40Cr |
| EPTT substance | 42CrMo | Machining precision of EPTTs | six Grade |
| Gear material | 20CrMnTi | Lubricating oil | Artificial Grease |
| Floor hardness of EPTTs | EPTC58-62 | Warmth therapy | EPTTize amp quencher |
| Brand name of bearings | C ampU, EPTB | Vibration | le15 mum |
| Model of oil seal | SKF | Oil Temp. rise (MAX) | 40 ordmC |
| Sound (MAX) | fifty five-70 dB | Noise (MAX) | 70 ordm |
FAQ
Q: Can you make the EPTT with customization?
A: Yes, we can customise per your request, like EPTT, voltage, pace, shaft dimensions, flange, terminal box, IP grade, and many others.
Q: Do you give samples?
A: Of course. Sample is available for testing.
Q: What is your MOQ?
A: It is 1pcs for the starting of our organization.
Q: What is your guide time?
A: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd product need to have five-30days, a bit EPTTer for EPT items.
Q: Do you provide EPTT assistance?
A: Of course. Our business have style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment group, we can supply EPTT assistance if you
need.
Q: How to ship to us?
A: It is offered by air, or by sea, or by prepare.
Q: How to shell out the funds?
A: T/T and L/C is desired, with distinct currency, incXiHu (West Lake) Dis.Hu (West Lake) Dis. USD, EUR, RMB, and so on.
Q: How can I know the merchandise is suitable for me?
A: gt1ST verify drawing and specification gt2nd test sample gt3rd commence mass generation.
Q: Can I occur to your business to check out?
A: Of course, you are welcome to check out us at any time.
Q: How shall we make contact with you?
A: You can deliver inquiry immediately, and we will react in 24 hrs.