We – EPG Team the largest gearbox & motors , couplings and gears factory in China with 5 different branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Customized Dsh Collection Double-Screw Conical Mixer Equipment
Transient INTRODUCTION:
The PerMix PNA sequence Conical Screw Mixer is a batch mixing equipment utilized widely in mixing purposes that demand mild mixing with small item distortion, nominal heat generation, and very correct mixing homogeneity. Because it was initial created far more than sixty many years ago, it has been recognized as a very good remedy for the products which is fragile, heat delicate or tending to segregate.
Thanks to the explanation the PerMix Conical Screw Mixer utilizes the gravity to produce the considerable downward massflow, it saves power in contrast with a horizontal mixer.
These Conical Screw Mixers are also featured with no contamination to the item in the course of the mixing, due to the fact that the shaft sealing & bearing is over the wor ept region, therefore no get in touch with with the solution.
HOW IT Works:
Inside of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, a few screws according to specified application) rotating by its personal axle which is in parallel to and near the wall of the cone vessel. The mixing screw lifts the item about it from base to the top, and then the powder falls down due to the gravity, leading to a convective mixing.
At the very same time, the screw is supported by an orbital arm and is rotating about the middle of the cone like a planetary, so that the powders in every single corner of the cone can be blended by the screw, and a 3-dimentional mixing performance occurs in the whole cone.
Options:
– Feeding & Discharging
A assortment of feeding & discharging approaches obtainable.
– Screw Variety
We offer you one screw, double screw and triple screw to give diverse mixing depth.
– Push technique
Push method by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, and so forth.
– Construction Material and Finish
We are able to supply our PVR Mixers with make contact with portion to be built in Carbon metal, SS304, SS316/316L, Titanium, Duplex stainless metal, Hastelloy, and so forth. End of inside and external end can be dull polished, 180 grit polished (foods grade), or mirror polished. For abrasive supplies we offer you hardened metal as the contact component.
– Spray nozzle
Liquid can be included into the powder by spray nozzles on the prime.
– Heating/Cooling jacket
Jacketed trough for heating/cooling procedure
– Vacuum drying & deaerating
PNA Conical Screw Mixers can be created to a vacuum mixer dryer for vacuum drying & deaerating or for inner strain wor ept for unique purposes.
Programs:
– Animal Treatment
Animal Feeds, Hen Fattening Feed, Fish Food items, Mineral Feed, Pet Foods, Poultry Feed, Rabbit Feed, Veterinary Medicine
– Substances
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Pharmaceuticals, Pigments, Plastic Additives, Resins, Strong Lubricants
– Every day Treatment
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
– Constructing Resources
Ornamental Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composite
Specs of Conical Screw Mixer:
Model | Complete quantity (liter) |
Wor ept quantity (liter) |
Electricity (*) (kW) |
RPM | Dia. (mm) |
H, whole height (**) (mm) |
Inlet (***) (mm) |
Outlet (****) (mm) |
Bodyweight (kg) |
PNA-two hundred | 200 | a hundred and twenty | 2.2+.37 | 140/two | 888 | 1557 | 140 | 230 | five hundred |
PNA-three hundred | 300 | a hundred and eighty | two.2+.37 | a hundred and forty/two | 990 | 1722 | 180 | 230 | 550 |
PNA-500 | five hundred | 300 | 3+.fifty five | a hundred and forty/two | 1156 | 1991 | two hundred | 230 | 600 |
PNA-800 | 800 | 480 | 4+.55 | sixty/2 | 1492 | 2256 | 250 | three hundred | 950 |
PNA-1000 | a thousand | 600 | four+.fifty five | sixty/2 | 1600 | 2432 | three hundred | 300 | 1200 |
PNA-1500 | 1500 | 900 | five.5+.seventy five | 60/two | 1780 | 2725 | 300 | 300 | 1350 |
PNA-2000 | 2000 | 1200 | five.5+.seventy five | sixty/two | 1948 | 3001 | 350 | 350 | 1500 |
PNA-2500 | 2500 | 1500 | seven.5+1.five | sixty/two | 2062 | 3571 | 350 | 350 | 1800 |
PNA-3000 | 3000 | 1800 | seven.5+1.5 | sixty/2 | 2175 | 3207 | 350 | 350 | 2100 |
PNA-4000 | 4000 | 2400 | 11+2.2 | 40/2 | 2435 | 4571 | four hundred | 400 | 2500 |
PNA-5000 | 5000 | 3000 | fifteen+2.2 | 40/two | 2578 | 4260 | four hundred | four hundred | 3000 |
PNA-6000 | 6000 | 3600 | eighteen.5+three | 40/2 | 2715 | 4470 | four hundred | four hundred | 3500 |
PNA-8000 | 8000 | 4800 | 22+3 | forty/1.3 | 2792 | 5000 | four hundred | 450 | 3800 |
PNA-ten thousand | ten thousand | 6000 | 30+4 | 40/1.3 | 3000 | 5240 | five hundred | 450 | 4300 |
one. (*) (**) (***) (****): Adjustments are accessible according to the customer’s ask for.
two. Customized sizes offered as per ask for
three. All specifications and illustrations are as correct as is reasonably feasible, but they are not binding.
four. PerMix reserves the correct to modify the design with no notice.
Machine Information:
Our Clients:
Much more Items by PerMix:
PerMix Benefits:
FAQ:
Q: What is your price tag stage compared with European suppliers and regional Chinese suppliers?
A: Relying on the device variety and size, our value degree is 30%-sixty% significantly less than the European suppliers and 5-15% greater than the huge local suppliers.
Q: Are you capable to supply tailor-produced design and style and generation for the mixers?
A: Yes, in fact much more than 50 % of our mixers are tailor produced, which is one of our powerful details.
Q: Are you in a position to design and style and make other processing equipment?
A: We are open up to talk about about it.
Q: Can you supply machines to OEM buyers, meaning to label their makes on the devices.
A: Yes we are performing it a whole lot. We have several OEM associates in the Usa.
Q: Do you have agent community out of China?
A: Sure we do have agents but only in some international locations, for example in Usa, Germany, Poland, Spain, Denmark, Turkey, Argentina, and so forth. We are even now bathroom ept for a lot more agents since we feel to perform with brokers is the greatest way to do organization.
Q: What is your supply direct time of the mixing products.
A: Depending on the dimensions and level of customization, but usually it is from 6-14 months.
Q: How do you pack and ship the mixing devices?
A: For machines don’t demand full container loading, we will pack them in picket scenario. For FCL (complete container loading) cargo, we will just wrap the equipment in plastic films and fix them in the container. The cargo can be both by air or by sea
The use of unique products manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the listed substitution elements contained herein are not sponsored, authorized, or manufactured by the OEM.